How Much Line to Put on a Baitcaster

Our Reviews:

We can make the world a little bit better with great in-depth reviews. Why? Because great in-depth Outdoor gear, Travel, Water Sports reviews will help you select the right products for your specific needs, budget, and interests. And when you have the right product, you're a little bit happier which affects the people around you!

When it comes to deciding How Much Line to Put on a Baitcaster, there are many controversies. Some suggest putting the line in completely, while others suggest putting only half of the line on the baitcaster.

Most fishermen lack knowledge about how much line to put on a baitcaster. Way too many anglers don’t put enough line. Moreover, they don’t spool the baitcaster the right way! This wastes time, energy and money.

As a beginner, it can be pretty intimidating to use a baitcaster because there are so many different parts of the baitcaster and so many things you need to be careful about! One of these is how much line to put on a baitcaster.

So, what is the real deal? How much line do you need to put on a bait caster?

Keep reading this guide to know how much line to put on a baitcaster. We discuss in detail how much line to put, and why!

How Much Line to Put on a Baitcaster

You don’t want your baitcaster to have too much line on it – because you’re never really going to use all of it anyway. On the other hand, if you only fill half of it, the baitcaster won’t cast properly. Therefore, you need a perfect balance that doesn’t have too much or too little.

The best solution is to put enough line so that there’s a gap of 1/8th an inch between the point where the line ends, and the point at the top of the spool. The gap could be a little less than that as well, but it has to be a maximum of 1/8th of an inch. Anything less than that and your baitcaster won’t cast properly. You don’t want to keep it full because then you’ll have to face a lot of backlashes!

This is in contrary to a spinning reel spool, which you need to fill to the edge, leaving very little gap. This is because spinning reel spools have more friction and they won’t cast well if they are only half-full. On the other hand, the line in a baitcaster doesn’t have to face a lot of friction!

Best Line to Use on Your Baitcaster

There are basically three types of fishing lines that you can choose from:

  1. Fluorocarbon fishing line
  2. Monofilament fishing line
  3. Braided fishing line

The type of line you should use on your baitcaster mostly depends on what type of fish you want to catch. Generally, braided lines are used more often because they are more sensitive and durable. Monofilament fishing lines are great for fish that are near the surface. However, if you want to go after fish that are deeper beneath the surface, use a fluorocarbon fishing line!

The video below gives a detailed discussion on which is the best line for a baitcaster!

Why Use a Braided Line on Your Baitcaster

Although braided lines are more expensive, they’re worth the high price because they don’t break easily. If your braided line gets tangled in a weed, it won’t snap easily. Thus, in the long run, it does save you money.

Here are a few other pros of using a braided line on your baitcaster:

  • It gives a smooth casting
  • It doesn’t tangle up easily
  • It’s not easy for fish to bite it and chop it off!

However, if you’re just a beginner, you should try using a monofilament fishing line or fluorocarbon fishing line first and get used to it before moving on to the braided fishing line.

Frequently Asked Questions

Do I need to cover my baitcaster with a backing material if I’m using the braided line?

Yes, it’s a good idea to cover your baitcaster with a backing of normal line when you’re using a braided line. This is because the braided line offers less friction and slides off the baitcaster very easily. By providing a backing of normal line, you’re giving it more friction so that too much of it doesn’t slip off.

This also helps save a lot of money because the backing material isn’t going to be used. It also prevents too much of the more expensive braided line from getting released.

How do I avoid getting backlashes with baitcaster reels?

One of the ways to avoid getting backlashes is to make sure you’ve adjusted your reels. Pay attention to the Spool Tension Knob. This knob determines how easy it is for your spool to spin. You need to adjust the knob properly so that it’s not too tight and not too loose. The best way to adjust the knob is to make sure that your bait falls slowly when you let go of the Thumb Bar.

You can also adjust the brakes. These two adjustments will reduce backlash and it will prevent a bird nest from setting up in your spool.

However, if you do get a backlash, you can check out how to remove a backlash here.

Which is better, a baitcaster or a spinning reel?

Spinning reels are great for beginners! They don’t get any backlash and are easier to operate than baitcasters. Moreover, they’re great for use when you don’t need any accuracy.

Baitcasters, on the other hand, require a lot more practice for you to be able to operate them properly. They’re more accurate so they’re great for tricky places in which you want to cast the lure at a specific spot. Moreover, there are higher chances of getting a backlash with baitcasters. You can also make your lure go a larger distance with a baitcaster.

How can I prevent injury to my forearm while casting?

Injuries to forearms are pretty common while casting. The injury is usually caused by overextending your forearm. Constant over-extension over a matter of months can damage and inflame your tendons, causing pain. One way of preventing such an injury is to keep your elbow just by your side. Don’t swing your arms forwards and backwards! Furthermore, don’t extend your forearm to an angle of 180 degrees!

Baitcaster VS Spinning Reel

The table below shows the differences between a baitcaster and a spinning reel. This will guide you on which type of equipment is better for you.

FeatureSpinning ReelBaitcasting Reel
Risk of getting backlashLow riskHigh risk
Casting distanceMediumHigh
Type of fishSmall to medium-sized fishLarge fish
Lure weightSupports low lure weightSupports high lure weight
DurabilityLess durableMore durable
MaintenanceEasy to maintainHard to maintain
CostLess costlyMore costly

Tips to Get More Baitcaster Distance

Covering a longer distance with your baitcaster requires a lot of skill and expertise, but there are a few tricks that can help you cover more baitcaster distance. These tips are listed below:

  • Make sure you use less braking power when you’re using a braid line

The braid line is lighter, which means you need less braking power for a braid line to get greater efficiency and hence, a greater distance.

  • Make sure the line guide is in the center

The line guide is the point where the line leaves the spool and enters the rod. If this line guide is more toward the right or the left, it will generate more friction. Therefore, make sure your line guide is in the center when you’re casting.

  • Instead of using the normal line for backing, use a braided line for the backing. Braid lines provide less friction so the spool spins faster when using a braid line. This allows your lure to reach a greater distance.
  • Use your thumb as brakes!

Using your thumb as brakes minimizes the friction caused by the brakes. To use your thumb as brakes, you’ll need to practice first. Here are a few steps to help you master the art of using your thumb as brakes:

  1. Make sure the tension is tight at first
  2. Press the thumb bar
  3. Now, reduce the tensions slowly and steadily
  4. While you’re reducing the tension, your bait will start to fall. That’s when you need to start practicing with your thumb!
  5. Cast the line and put your thumb over it. You don’t want to put a lot of pressure that would make the spool stops spinning. You just want to put enough pressure to make sure that you don’t feel any loops forming.
  6. Now, start again. This time, useless tension from the start. As a result, you’ll have to put more thumb pressure at the start!
  7. After some distance is covered by the line, reduce the pressure of your thumb
  8. Keep practicing until you perfect it!

Conclusion

To conclude, deciding how much lines to put on a baitcaster is pretty easy. Start with using enough so that there’s a gap of 1.8th of an inch between the spool and the point where the line ends!

This way, you don’t have too much line and you’ll avoid backlash. Make sure you’re using the correct type of line for your use!

Happy fishing!

Leave a Comment

Our Reviews:

We can make the world a little bit better with great in-depth reviews.

Why? Because great in-depth gear reviews will help you select the right products for your specific needs, budget, and interests. And when you have the right product, you're a little bit happier which affects the people around you!

GearAreLogo

GearAre.com was founded in 2020 by the two brothers Patrick and Alex.

We're a free review guide - run by passionate Divers, Sports, and Outdoor fanatics

Income disclosure: We are reader supported, and earn affiliate commissions when you buy via links found on GearAre.com:
If you find a good deal on our site, you click to the retailer and you buy the product, we get a commission of the sale. This is how we pay ourselves. It does not make the product pricier for you.

GearAre is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program.